Qingdao Longhuajie Machinery Manufacturing Co., Ltd.

 

Banner
Home > News Center > Content
How To Operate The Site Car Washing Machine Correctly
- 2020-06-30-

With the strict control of national environmental protection requirements, the construction site car washing machine can be seen everywhere near the door of each construction site. We are no longer so unfamiliar with the site car washing machine, but how much do you know about the correct operation of the site car washing machine? With this question, the manufacturer of the car washing machine at the construction site will give you the following answers:

For the operation of site car washing machine, the following points should be kept in mind:

First of all, the operators of the site car washing machine must be strictly trained and can operate the car washing machine independently and skillfully.

2. Before the power transmission of the car washing mechanism gate on the construction site, it is necessary to ensure that the sensor and the ravage switch are normal, the emergency stop switch has been reset, the water level in the pool is within the scope of car washing, and there are no idle personnel staying in the car washing area.

3. Turn off the main power circuit breaker, the power indicator light is on, and the construction site car washing machine enters standby condition.

4. Before entering the car washing machine at the construction site, the driver should be informed of the cleaning process, drive the vehicle slowly, do not conflict quickly, and admit that the door and window have been closed.

5. During the procedure operation, the power supply shall not be turned off without permission to ensure the orderly operation of the whole car washing procedure.

6. Timely clean up the sludge in the accumulation pool of the car washing machine on the construction site, so as to prevent the mixed flow into the clean water pool and block the nozzle.

7. Do a good job in cleaning and maintenance of the equipment, and regularly check whether the nozzle and spray hole are blocked to prevent affecting the cleaning effect.

8. Before any cleaning and maintenance, be sure to block the power supply.

9. Avoid water shortage and car washing phenomenon to avoid burning water pump.

10. In winter, the water in the pipe should be drained after work to prevent freezing.


Qingdao Longhuajie Machinery Manufacturing Co., Ltd.

contact us

    Qingdao Longhuajie Machinery Manufacturing Co., Ltd.

    No. 69, Jinhua 1st Road, Huashan, Jimo City, Qingdao

    Contact

    Manager Wu

    13335067671

    Www.gongdixiche.com

Mobile